NEW YouTube Video: https://www.youtube.com/watch?v=KsqOac-52Rs Strut Bearing Replacement Guide Your propshaft is supported at the transmission coupling on the forward end, and the strut at the prop end. Inside the strut is a “Strut Bearing” which will look more like a brass sleeve with rubber ribs inside. These are considered wear…
Generic Marine Wiring Color Codes – (Used in American Skier Boats)
Decal Installation Instructions 1) Prep surface, clean with rubbing alcohol. 2) Before peeling anything from the decal, place the decal where you want it, you can put a small mark on the decal front backing paper to mark center or position aligning it with a piece of masking tape…
Rubrail Replacement Instructions BY: Ron Tanis, Tanis R & D LLC List of things to have to complete this job: Battery drill (s) Caulking gun 100% silicone caulk black (Prefer LifeSeal) Large flat screwdriver (preferably with very soft, dull edges) Hot air heat gun ¾” masking tape Acetone Safety Knife…
